Details
The Vaporite Hyper has a temperature control knob and a fan to activate the "forced air" system. This top-of-the-line Vaporite vaporizer also includes an aromatherapy bulb for heating aromatherapy oils. Once the unit reaches the set temperature, it will beep to indicate that it is ready to use and the fan will automatically turn on and will stay on till the temperature decreases below the set temperature.
The Vaporite Hyper includes the following:
1 Vaporite Hyper Vaporizer Unit
1 Vapor Whip
2 Cleaning Sticks
1 Power Cord
1 Aromatherapy Bulb
1 Pack of Replacement Screens
1 Warranty Card (you must register within the 7 days of purchase to be covered) - Six Month Limited Manufacturer's Warranty (does not cover accessories or other removable parts such as glass parts of power cable)
Instructions:
1. Before using the unit for the first time, it is important to heat the unit at the highest temperature for about 3 minutes to burn off any remaining factory oils and then allow it to cool down.
2. Before turning on the unit, remove the styrofoam insert.
3. Turn on the vaporizer by pressing the power button.
4. Use the temperature knob to set the vaporizer to the desired temperature.
5. Once the vaporizer reaches the set temperature, the vaporizer will beep and the fan will automatically deploy the forced air fan indicating that the unit is now ready to use.
6. Place your crushed herbal blend in the glass chamber and begin inhaling using the vapor whip. If using for oil, attach the aroma bulb with oil in it (oils require higher temperature).
7. Turn the vaporizer off when not in use.
The Vaporite Hyper includes the following:
1 Vaporite Hyper Vaporizer Unit
1 Vapor Whip
2 Cleaning Sticks
1 Power Cord
1 Aromatherapy Bulb
1 Pack of Replacement Screens
1 Warranty Card (you must register within the 7 days of purchase to be covered) - Six Month Limited Manufacturer's Warranty (does not cover accessories or other removable parts such as glass parts of power cable)
Instructions:
1. Before using the unit for the first time, it is important to heat the unit at the highest temperature for about 3 minutes to burn off any remaining factory oils and then allow it to cool down.
2. Before turning on the unit, remove the styrofoam insert.
3. Turn on the vaporizer by pressing the power button.
4. Use the temperature knob to set the vaporizer to the desired temperature.
5. Once the vaporizer reaches the set temperature, the vaporizer will beep and the fan will automatically deploy the forced air fan indicating that the unit is now ready to use.
6. Place your crushed herbal blend in the glass chamber and begin inhaling using the vapor whip. If using for oil, attach the aroma bulb with oil in it (oils require higher temperature).
7. Turn the vaporizer off when not in use.