Details
Vaporite Mini Digit is a digital display vaporizer constructed of heavy duty steel with up and down buttons to adjust to the desired vaporizing temperature. A truly hassle free vaporizer It also comes with an aromatherapy bulb for heating aromatherapy oils.
The Vaporite Mini Digit includes the following:
1 Vaporite Mini Digit Vaporizer Unit
1 Vapor Whip
2 Cleaning Sticks
1 Power Cord
1 Aromatherapy Bulb
1 Pack of Replacement Screens
1 Warranty Card (you must register within the 7 days of purchase to be covered) - Six Month Limited Manufacturer''''''''s Warranty (does not cover accessories or other removable parts such as glass parts of power cable)
Instructions:
1. Before using the unit for the first time, it is important to heat the unit at the highest temperature for about 3 minutes to burn off any remaining factory oils and then allow it to cool down.
2. Plug in the vaporizer.
3. Now press the Set button to display the initial temperature on the digital display. Note that the Set button also functions as a Standby button. Pressing the Set button will place the vaporizer in Standby mode; when pressed again, the unit will display the last set temperature.
4. Use the up/down buttons to set the vaporizer to the desired temperature.
5. Once the vaporizer reaches the set temperature, the green light will start blinking indicating that the unit is now ready to use.
6. If using the aromatherpy bulb, attach the bulp with oil in it (oils require a higher temperature).
7. Turn the vaporizer off when not in use.
The Vaporite Mini Digit includes the following:
1 Vaporite Mini Digit Vaporizer Unit
1 Vapor Whip
2 Cleaning Sticks
1 Power Cord
1 Aromatherapy Bulb
1 Pack of Replacement Screens
1 Warranty Card (you must register within the 7 days of purchase to be covered) - Six Month Limited Manufacturer''''''''s Warranty (does not cover accessories or other removable parts such as glass parts of power cable)
Instructions:
1. Before using the unit for the first time, it is important to heat the unit at the highest temperature for about 3 minutes to burn off any remaining factory oils and then allow it to cool down.
2. Plug in the vaporizer.
3. Now press the Set button to display the initial temperature on the digital display. Note that the Set button also functions as a Standby button. Pressing the Set button will place the vaporizer in Standby mode; when pressed again, the unit will display the last set temperature.
4. Use the up/down buttons to set the vaporizer to the desired temperature.
5. Once the vaporizer reaches the set temperature, the green light will start blinking indicating that the unit is now ready to use.
6. If using the aromatherpy bulb, attach the bulp with oil in it (oils require a higher temperature).
7. Turn the vaporizer off when not in use.